technical data sheet 1 / 3 str. bulk.jack ez fit type rear mount r185a.316.200 cable 1/2'' superflexible corrugated series : eco 7/16 issue : 0927 a in the effort to improve our products, we reserve t he right to make changes judged to be necessary. all dimensions are in mm. . . pn an components body center contact outer contact insulator gasket others parts - - materials brass bronze ptfe silicone rubber brass - - plating ( m) bbr silver bbr - -
technical data sheet 2 / 3 str. bulk.jack ez fit type rear mount r185a.316.200 cable 1/2'' superflexible corrugated series : eco 7/16 issue : 0927 a in the effort to improve our products, we reserve t he right to make changes judged to be necessary. packaging standard unit other 20 w option contact us electrical characteristics impedance 50 f requency 0 - 3 ghz vswr 1.10 + 0.0000 x f(ghz) maxi insertion loss 0.05 f(ghz) db maxi rf leakage - ( na - f(ghz)) db maxi voltage rating 1270 veff maxi dielectric withstanding voltage 2000 veff mini insulation resistance 10000 m mini mechanical characteristics center contact retention axial force C mating end 200 n mini axial force C opposite end 100 n mini torque na n.cm mini recommended torque mating na n.cm panel nut 3500 n.cm clamp nut 950 n.cm a/f clamp nut 21.0000 mm mating life 100 cycles mini weight 148.4000 g environmental operating temperature - 40/+85 c hermetic seal na atm.cm3/s panel leakage na specification cable assembly stripping a b c d e f mm 8.00 21.0 31.0 0.00 2.00 0.00 assembly instruction : recommended cable(s) fsj4rn-50b fsj4p-50b-4 - 1/2 m2839z m2830z characteristics indicated on this data sheet are th ose that can be achieved with the highest performance cable. intrin sic limitations of the cable may diminish the performance of the assem bly cable retention - pull off 350 n mini - torque na n.cm tooling part number description hexagon . . . r282.010.050 stripping tool other characteristics watertightness:ip67
technical data sheet 3 / 3 str. bulk.jack ez fit type rear mount r185a.316.200 cable 1/2'' superflexible corrugated series : eco 7/16 issue : 0927 a in the effort to improve our products, we reserve t he right to make changes judged to be necessary. 1 body o-ring clamp nut sealing - strip the cable . - do not damage the outer conductor . - the end surface of inner conductor should be chamfered. - remove impurities such as copper scrap and burr on the end surface of the cable. 2 - screw the sealing part along the outer conductor of the cable until stop. sealing 3 - put the o-ring onto the clamp nut. - screw the clamp nut along the outer conductor of the cable, make dimension e right after tighteni ng. o-ring clamp nut 4 - screw the body onto the cable assembly . - recommanded coupling torque : 950n.cm 21/2flats 19/2flats
|
